Home > Published Issues > 2019 > Volume 14, No. 4, April 2019 >

Design and Simulation of Effects Corresponding to Reduced Conducting area Using Slotted Meandering Line for Compact Ultra -Wideband (UWB) Antenna

Mahadu A. Trimukhe and Balaji G. Hogade
Department of Electronics and Telecommunication, Terna Engineering College, Navi-Mumbai, India

Abstract—A novel printed monopole antenna using slotted meandering line is proposed for UWB application. The novelty of the design is obtained by using a slotted meandering line to reduce the surface area of the antenna structure without degrading the original frequency band. The conducting surface area of the proposed antenna is 70 mm2, which is 46% less compared to the reference antenna. The overall size of the proposed antenna is 18% reduced as compared to the reference antenna is achieved in this paper. The antenna has been constructed on low-cost 1.6 mm thick FR4 substrate. The proposed antenna operates between 2.73 – 10.73 GHz and stable radiation patterns are achieved over entire UWB band. The proposed antenna is fabricated and tested. The Measured results are in good agreement with simulated results.
 
Index Terms—Compact size, small area, ultra-wideband, slotted meandering line, Reflection coefficient

Cite: Mahadu A. Trimukhe and Balaji G. Hogade, "Design and Simulation of Effects Corresponding to Reduced Conducting area Using Slotted Meandering Line for Compact Ultra -Wideband (UWB) Antenna," Journal of Communications, vol. 14, no. 4, pp. 318-323, 2019. Doi: 10.12720/jcm.14.4.318-323