• Please send your full manuscript to: jocm@vip.163.com

Impulsive Noise Cancellation for MIMO Power Line Communications

Xiaoyu Hu, Zhe Chen, and Fuliang Yin
School of Information and Communication Engineering, Dalian University of Technology, Dalian 116023,China
Abstract—Power line channels are often badly corrupted by impulsive noise. In this paper, an impulsive noise cancellation method for MIMO power line communication is proposed. First, the received signal is transformed into frequency domain and MIMO detection is carried out. Then, the detected signal is transformed back to time domain and the noise estimation can be obtained by subtracting detected signal from the original received signal, the result is the estimation of the noise in time domain. Finally, impulsive noise can be found out from the estimation of the noise by a threshold detector and canceled from the original received signal. The de-noised output is transformed back to space-time domain to repeat the impulsive noise cancellation process until the output is unchanged. Simulation results show that the proposed method can suppress in PLC channel impulsive noise and improve bit-error ratio performance in multi-wire power line communication.

Index Terms—Impulsive noise cancellation, power line communications; multiple input multiple output; space time block code

Cite: Xiaoyu Hu, Zhe Chen, and Fuliang Yin, "Impulsive Noise Cancellation for MIMO Power Line Communications," Journal of Communications, vol. 9, no. 3, pp. 241-247, 2014. Doi: 10.12720/jcm.9.3.241-247
Copyright © 2013-2019 Journal of Communications, All Rights Reserved
E-mail: jcm@etpub.com